D-Link X-STACK DES-3200 SERIES - Page 243

xStack
®
DES-3200 Series Layer 2 Managed Fast Ethernet Switch CLI Reference Guide
239
26-4 show filter extensive_netbios
Description
This command is used to display the extensive netbios state on the Switch.
Format
show filter extensive_netbios
Parameters
None.
Restrictions
None.
Example
To display the extensive_state created on the Switch:
DES-3200-28P:admin#show filter extensive_netbios
Command: show filter extensive_netbios
Enabled ports: 1-3
DES-3200-28P:admin#