err_disabled - (Optional) Indicates if ports are disabled by some reasons will be displayed.
details - (Optional) Displays the port details.
Command: show ports details
Port : 1
--------------------
Port Status : Link Up
Description :
HardWare Type : Fast Ethernet
MAC Address : 00-01-02-03-04-01
Bandwidth : 100000Kbit
Auto-Negotiation : Enabled
Duplex Mode : Full Duplex
Flow Control : Disabled
MDI : Normal
Address Learning : Enabled
Last Clear of Counter : 2 hours 43 mins ago
BPDU Hardware Filtering Mode: Disabled
Queuing Strategy : FIFO
TX Load : 0/100, 0 bits/sec, 0 packets/sec
RX Load : 0/100, 0 bits/sec, 0 packets/sec