D-Link X-STACK DES-3200 SERIES - Page 275

xStack
®
DES-3200 Series Layer 2 Managed Fast Ethernet Switch CLI Reference Guide
271
delete - Specify to delete the router ports.
<portlist> - Specify a range of ports to be configured.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To set up static router ports:
DES-3200-28P:admin#config router_ports default add 1-10
Command: config router_ports default add 1-10
Success.
DES-3200-28P:admin#
30-6 config router_ports_forbidden
Description
This command is used to designate a range of ports as being not connected to multicast-enabled
routers. This ensures that the forbidden router port will not propagate routing packets out.
Format
config router_ports_forbidden [ <vlan_name 32> | vlanid <vlanid_list> ] [add | delete]
<portlist>
Parameters
<vlan_name 32> - Specify the name of the VLAN on which the router port resides.
vlanid - Specify the ID of the VLAN on which the router port resides.
<vlanid_list> - Enter the VLAN ID list here.
add - Specify to add the router ports.
delete - Specify to delete the router ports.
<portlist> - Specify a range of ports to be configured.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To set up port range 1-10 to forbidden router ports of default VLAN:
DES-3200-28P:admin#config router_ports_forbidden default add 11-12
Command: config router_ports_forbidden default add 11-12
Success.
DES-3200-28P:admin#