D-Link X-STACK DES-3200 SERIES - Page 276

xStack
®
DES-3200 Series Layer 2 Managed Fast Ethernet Switch CLI Reference Guide
272
30-7 enable igmp_snooping
Description
This command is used to enable IGMP snooping on the Switch.
Format
enable igmp_snooping
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To enable IGMP snooping on the Switch:
DES-3200-28P:admin#enable igmp_snooping
Command: enable igmp_snooping
Success.
DES-3200-28P:admin#
30-8 disable igmp_snooping
Description
This command is used to disable IGMP snooping on the Switch. Disabling IGMP snooping allows
all IGMP and IP multicast traffic to flood within a given IP interface.
Format
disable igmp_snooping
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.