D-Link X-STACK DES-3200 SERIES - Page 358

xStack
®
DES-3200 Series Layer 2 Managed Fast Ethernet Switch CLI Reference Guide
354
ipv6 - (Optional) Specify the IPv6 address used for the display.
<ipv6addr> - Enter the IPv6 address used for this configuration here.
Restrictions
None.
Example
To display management address information:
DES-3200-28P:admin#show lldp mgt_addr ipv4 10.90.90.90
Command: show lldp mgt_addr ipv4 10.90.90.90
Address 1 :
------------------------------------------------
Subtype : IPv4
Address : 10.90.90.90
IF Type : IfIndex
OID : 1.3.6.1.4.1.171.10.113.8.1
Advertising Ports : 1-2,5
DES-3200-28P:admin#
37-9 show lldp ports
Description
This command is used to display the LLDP per port configuration for advertisement options.
Format
show lldp ports {<portlist>}
Parameters
<portlist> - (Optional) Specify a range of ports to be displayed.
If the port list is not specified, information for all the ports will be displayed.
Restrictions
None.
Example
To display the LLDP port 1 TLV option configuration: