D-Link X-STACK DES-3200 SERIES - Page 360

xStack
®
DES-3200 Series Layer 2 Managed Fast Ethernet Switch CLI Reference Guide
356
Example
To display outbound LLDP advertisements for port 1 in detailed mode. Port description on the
display should use the same value as ifDescr.
DES-3200-28P:admin#show lldp local_ports 1 mode detailed
Command: show lldp local_ports 1 mode detailed
Port ID : 1
-----------------------------------------------------------------------------
Port ID Subtype : Local
Port ID : 1
Port Description : D-Link DES-3200-28P R4.00.020 P
ort 1
Port PVID : 1
Management Address Count : 1
Subtype : IPv4
Address : 10.90.90.90
IF Type : IfIndex
OID : 1.3.6.1.4.1.171.10.113.8.1
PPVID Entries Count : 0
(None)
VLAN Name Entries Count : 1
Entry 1 :
VLAN ID : 1
VLAN Name : default
Protocol Identity Entries Count : 0
CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a All
To display outbound LLDP advertisements for port 1 in normal mode: