D-Link X-STACK DES-3200 SERIES - Page 361

xStack
®
DES-3200 Series Layer 2 Managed Fast Ethernet Switch CLI Reference Guide
357
DES-3200-28P:admin#show lldp local_ports 1 mode normal
Command: show lldp local_ports 1 mode normal
Port ID : 1
-----------------------------------------------------------------------------
Port ID Subtype : Local
Port ID : 1
Port Description : D-Link DES-3200-28P R4.00.020 P
ort 1
Port PVID : 1
Management Address Count : 1
PPVID Entries Count : 0
VLAN Name Entries Count : 1
Protocol Identity Entries Count : 0
MAC/PHY Configuration/Status : (See Detail)
Power Via MDI : (See Detail)
Link Aggregation : (See Detail)
Maximum Frame Size : 1536
DES-3200-28P:admin#
To display outbound LLDP advertisements for port 1 in brief mode:
DES-3200-28P:admin#show lldp local_ports 1 mode brief
Command: show lldp local_ports 1 mode brief
Port ID : 1
-----------------------------------------------------------------------------
Port ID Subtype : Local
Port ID : 1
Port Description : D-Link DES-3200-28P R4.00.020 P
ort 1
DES-3200-28P:admin#
37-11 show lldp remote_ports
Description
This command is used to display the information learned from the neighbor parameters.
Format
show lldp remote_ports {<portlist>} {mode [brief | normal | detailed]}
Parameters
<portlist> - (Optional) Specify a range of ports to be configured. When port list is not specified,
information for all ports will be displayed.
mode – (Optional) Specify to display the information in various modes.