D-Link X-STACK DES-3200 SERIES - Page 370

xStack
®
DES-3200 Series Layer 2 Managed Fast Ethernet Switch CLI Reference Guide
366
DES-3200-28P:admin#disable loopdetect
Command: disable loopdetect
Success.
DES-3200-28P:admin#
38-5 show loopdetect
Description
This command is used to display the LBD global configuration.
Format
show loopdetect
Parameters
None.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To show the LBD global settings:
DES-3200-28P:admin#show loopdetect
Command: show loopdetect
LBD Global Settings
---------------------------
Status : Disabled
Mode : Port-based
Interval : 10 sec
Recover Time : 60 sec
Trap State : None
Log State : Enabled
DES-3200-28P:admin#
38-6 show loopdetect ports
Description
This command is used to display the LBD per-port configuration.
Format
show loopdetect ports {<portlist>}