D-Link X-STACK DES-3200 SERIES - Page 369

xStack
®
DES-3200 Series Layer 2 Managed Fast Ethernet Switch CLI Reference Guide
365
Format
enable loopdetect
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To enable the LBD function globally:
DES-3200-28P:admin#enable loopdetect
Command: enable loopdetect
Success.
DES-3200-28P:admin#
38-4 disable loopdetect
Description
This command is used to disable the LBD function globally on the Switch.
Format
disable loopdetect
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To disable the LBD function globally: