D-Link X-STACK DES-3200 SERIES - Page 414

xStack
®
DES-3200 Series Layer 2 Managed Fast Ethernet Switch CLI Reference Guide
410
DES-3200-28P:admin#show limited_multicast_addr ports 1,3
Command: show limited_multicast_addr ports 1,3
Port : 1
Access : Deny
Profile ID Name Multicast Addresses
----------- ----------- ----------------------------
1 customer 224.19.62.34 - 224.19.162.200
Port : 3
Access : Deny
Profile ID Name Multicast Addresses
----------- ---------------- ----------------------------
1 customer 224.19.62.34 - 224.19.162.200
DES-3200-28P:admin#
To show the limited multicast settings configured on VLAN 1:
DES-3200-28P:admin#show limited_multicast_addr vlan 1
Command: show limited_multicast_addr vlan 1
VLAN ID : 1
Access : Deny
Profile ID Name Multicast Addresses
---------- ----------------- -----------------------------
1 customer 224.19.62.34 - 224.19.162.200
Success.
DES-3200-28P:admin#
44-10 config cpu_filter l3_control_pkt
Description
This command is used to configure the port state for the Layer 3 control packet filter.
Format
config cpu_filter l3_control_pkt <portlist> [{dvmrp|pim|igmp_query |ospf | rip | vrrp} | all]
state [enable | disable]
Parameters
<portlist> - Specify the port list to filter control packets.
dvmrp – (Optional) Specify to filter the DVMRP control packets.
pim - (Optional) Specify to filter the PIM control packets.