D-Link X-STACK DES-3200 SERIES - Page 415

xStack
®
DES-3200 Series Layer 2 Managed Fast Ethernet Switch CLI Reference Guide
411
igmp_query - (Optional) Specify to filter the IGMP query control packets.
ospf - (Optional) Specify to filter the OSPF control packets.
rip - (Optional) Specify to filter the RIP control packets.
vrrp - (Optional) Specify to filter the VRRP control packets.
all - Specify to filter all the L3 protocol control packets.
state - Specify the filter function status. The default is disabled.
enable - Enable the filtering function.
disable - Disable the filtering function.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To filter the DVMRP control packets on ports 1 to 2:
DES-3200-28P:admin#config cpu_filter l3_control_pkt 1-2 dvmrp state enable
Command: config cpu_filter l3_control_pkt 1-2 dvmrp state enable
Success.
DES-3200-28P:admin#
44-11 show cpu_filter l3_control_pkt ports
Description
This command is used to display the L3 control packet CPU filtering state.
Format
show cpu_filter l3_control_pkt ports {<portlist>}
Parameters
<portlist> - (Optional) Specify the port list to display the L3 control packet CPU filtering state.
Restrictions
None.
Example
To display the filtering status for port 1 and 2: