D-Link X-STACK DES-3200 SERIES - Page 458

xStack
®
DES-3200 Series Layer 2 Managed Fast Ethernet Switch CLI Reference Guide
454
The event log displays Ethernet OAM event log information. The switch can buffer 1000 event logs.
The event log is different from sys-log as it provides more detailed information than sys-log. Each
OAM event will be recorded in both OAM event log and syslog.
Format
show ethernet_oam ports {<portlist>} [status | configuration | statistics | event_log {index
<value_list>}]
Parameters
<portlist> - (Optional) Specify the range of ports to display.
status - Specify to display the Ethernet OAM status.
configuration - Specify to display the Ethernet OAM configuration.
statistics - Specify to display Ethernet OAM statistics.
event_log - Specify to display the Ethernet OAM event log information.
index - (Optional) Specify an index range to display.
<value_list> - (Optional) Specify an index range to display.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To display Ethernet OAM statistics information for port 1:
DES-3200-28P:admin#show ethernet_oam ports 1 statistics
Command: show ethernet_oam ports 1 statistics
Port 1
------------------------------------------------------------
Information OAMPDU TX : 0
Information OAMPDU RX : 0
Unique Event Notification OAMPDU TX : 0
Unique Event Notification OAMPDU RX : 0
Duplicate Event Notification OAMPDU TX: 0
Duplicate Event Notification OAMPDU RX: 0
Loopback Control OAMPDU TX : 0
Loopback Control OAMPDU RX : 0
Variable Request OAMPDU TX : 0
Variable Request OAMPDU RX : 0
Variable Response OAMPDU TX : 0
Variable Response OAMPDU RX : 0
Organization Specific OAMPDUs TX : 0
Organization Specific OAMPDUs RX : 0
Unsupported OAMPDU TX : 0
Unsupported OAMPDU RX : 0
Frames Lost Due To OAM : 0
DES-3200-28P:admin#