D-Link X-STACK DES-3200 SERIES - Page 459

xStack
®
DES-3200 Series Layer 2 Managed Fast Ethernet Switch CLI Reference Guide
455
49-3 clear ethernet_oam ports
Description
This command is used to clear Ethernet OAM information.
Format
clear ethernet_oam ports [<portlist> | all] [event_log | statistics]
Parameters
<portlist> - Specify a range of Ethernet OAM ports to be cleared.
all - Specify to clear all Ethernet OAM ports.
event_log - Specify to clear Ethernet OAM event log information.
statistics - Specify to clear Ethernet OAM statistics.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To clear port 1 OAM statistics:
DES-3200-28P:admin#clear ethernet_oam ports 1 statistics
Command: clear ethernet_oam ports 1 statistics
Success.
DES-3200-28P:admin#
To clear port 1 OAM events:
DES-3200-28P:admin#clear ethernet_oam ports 1 event_log
Command: clear ethernet_oam ports 1 event_log
Success.
DES-3200-28P:admin#