D-Link X-STACK DES-3200 SERIES - Page 508

xStack
®
DES-3200 Series Layer 2 Managed Fast Ethernet Switch CLI Reference Guide
504
green - Specify green as the mapped color.
red - Specify red as the mapped color.
yellow - Specify yellow as the mapped color.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
If a product supports per-port 802.1p mapping configuration, configure the mapping of 802.1p
priority 1 to red on ports 1-8.
DES-3200-28P:admin#config 802.1p map 1-8 1p_color 1 to red
Command: config 802.1p map 1-8 1p_color 1 to red
Success.
DES-3200-28P:admin#
57-15 show 802.1p map 1p_color
Description
This command is used to display the 802.1p to color mapping.
Format
show 802.1p map 1p_color {<portlist>}
Parameters
<portlist> - (Optional) Specify a list of ports.
Restrictions
None.
Example
To show the 802.1p color mapping on port 1:
DES-3200-28P:admin#show 802.1p map 1p_color 1
Command: show 802.1p map 1p_color 1
802.1p to Color Mapping:
----------------------------------------------------------------
Port 0 1 2 3 4 5 6 7
---- ------ ------ ------ ------ ------ ------ ------ ------
1 Green Green Green Green Green Green Green Green
DES-3200-28P:admin#