D-Link X-STACK DES-3200 SERIES - Page 582

xStack
®
DES-3200 Series Layer 2 Managed Fast Ethernet Switch CLI Reference Guide
578
66-9 delete syslog host
Description
This command is used to delete the syslog host(s).
Format
delete syslog host [<index 1-4> | all]
Parameters
host - The host index or all hosts.
<index> - Enter the host index value here.
all - Specify that all the host indexes will be used.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To delete the specific syslog host:
DES-3200-28P:admin#delete syslog host 4
Command: delete syslog host 4
Success.
DES-3200-28P:admin#
66-10 show syslog host
Description
This command is used to display the syslog host configurations.
Format
show syslog host {<index 1-4>}
Parameters
host - The host index or all hosts.
<index> - (Optional) Enter the host index value here.
If no parameter is specified, all hosts will be displayed.
Restrictions
None.