D-Link X-STACK DES-3200 SERIES - Page 596

xStack
®
DES-3200 Series Layer 2 Managed Fast Ethernet Switch CLI Reference Guide
592
Format
config tftp {server <ipaddr> | firmware_file <path_filename 64> | cfg_file <path_filename 64>
| log_file <path_filename 64> | attack_log_file <path_filename 64> | certificate_file
<path_filename 64> | key_file <path_filename 64> | tech_support_file <path_filename 64> |
debug_error_log_file <path_filename 64> | sim_firmware_file <path_filename 64> |
sim_cfg_file <path_filename 64> | sim_log_file <path_filename 64>}
Parameters
server - (Optional) Specify the IP address of the TFTP server.
<ipaddr> - The IP address of the TFTP server.
firmware_file - (Optional) Specify the pathname supports “download/upload
firmware_fromTFTP” function.
<path_filename 64> - Specify the pathname supports “download/upload firmware_fromTFTP”
function.
cfg_file - (Optional) Specify the pathname supports “download/upload cfg_fromTFTP” function.
<path_filename 64> - Specify the pathname supports “download/upload cfg_fromTFTP”
function.
log_file - (Optional) Specify the pathname supports “upload log_toTFTP” function.
<path_filename 64> - Specify the pathname supports “upload log_toTFTP” function.
attack_log_file - (Optional) Specify the pathname supports “upload attack_log_toTFTP” function.
<path_filename 64> - Specify the pathname supports “upload attack_log_toTFTP” function.
certificate_file - (Optional) Specify the pathname supports “download ssl certificate” function.
<path_filename 64> - Specify the pathname supports “download ssl certificate” function.
key_file - (Optional) Specify the pathname supports “download ssl certificate” function.
<path_filename 64> - Specify the pathname supports “download ssl certificate” function.
tech_support_file - (Optional) Specify specifying the pathname supports “upload
tech_support_toTFTP” function.
<path_filename 64> - Specify specifying the pathname supports “upload
tech_support_toTFTP” function.
debug_error_log_file - (Optional) Specify the pathname supports “debug error_log” function.
<path_filename 64> - Specify the pathname supports “debug error_log” function.
sim_firmware_file - (Optional) Specify the pathname supports “download/upload sim_ms
firmware_fromTFTP” function.
<path_filename 64> - Specify the pathname supports “download/upload sim_ms
firmware_fromTFTP” function.
sim_cfg_file - (Optional) Specify the pathname supports “downloa/upload sim_ms
configuration_fromTFTP” function.
<path_filename 64> - Specify the pathname supports “downloa/upload sim_ms
configuration_fromTFTP” function.
sim_log_file - (Optional) Specify the pathname supports “upload sim_ms log_toTFTP” function.
<path_filename 64> - Specify the pathname supports “upload sim_ms log_toTFTP” function.
Restrictions
Only Administrator-level users can issue this command.
Example
To configure TFTP server: