D-Link X-STACK DES-3200 SERIES - Page 597

xStack
®
DES-3200 Series Layer 2 Managed Fast Ethernet Switch CLI Reference Guide
593
DES-3200-28P:admin#config tftp server 10.90.90.10
Command: config tftp server 10.90.90.10
Success.
DES-3200-28P:admin#
To configure TFTP server and specify the pre defined firmware file, log file:
DES-3200-28P:admin#config tftp server 10.90.90.1 firmware_file DES3200.had
cfg_file log_tmp
Command: config tftp server 10.90.90.1 firmware_file DES3200.had cfg_file
log_tmp
Success.
DES-3200-28P:admin#
69-4 show tftp
Description
This command is used to show the TFTP server and the file path pre-configured by administer.
Format
show tftp
Parameters
None.
Restrictions
None.
Example
To show TFTP settings, if pre-configure server IPv4 address, firmware_file and cfg_file only: