D-Link X-STACK DES-3200 SERIES - Page 617

xStack
®
DES-3200 Series Layer 2 Managed Fast Ethernet Switch CLI Reference Guide
613
DES-3200-28P:admin#create trusted_host 10.48.74.121
Command: create trusted_host 10.48.74.121
Success.
DES-3200-28P:admin#
74-2 delete trusted_host
Description
This command is used to delete a trusted host entry made using the create trusted_host command
above.
Format
delete trusted_host [ipaddr <ipaddr> | network <network_address> | all]
Parameters
ipaddr - The IP address of the trusted host.
<ipaddr> - Enter the IP address used for this configuration here.
network - The network address of the trusted network.
<network_address> - Enter the network address used for this configuration here.
all - All trusted hosts will be deleted.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To delete the trusted host:
DES-3200-28P:admin#delete trusted_host ipaddr 10.48.74.121
Command: delete trusted_host ipaddr 10.48.74.121
Success.
DES-3200-28P:admin#
74-3 config trusted_host
Description
This command is used to configure the access interfaces for the trusted host.
Format
config trusted_host [<ipaddr> | network <network_address>] [add | delete] {snmp | telnet |
ssh | http | https | ping | all}