8ñ24
SCHEDULED MAINT
Maintenance services and rec
performed on your vehicle in
Drive belt (alternator and pow
Engine oil & engine oil filter
Cooling system hose & conn
Engine coolant
Fuel filter
Fuel line & connections
Air cleaner element
Ignition timing
Spark plugs
Distributor cap & rotor
Charcoal canister & vapour l
PCV system
Camshaft belt
MAINTE
IN
ENGINE CONTROL SYSTEM
MAINTENANCE
ITEM
Chart Symbols:
I ñ Inspect these items and th
R ñ Replace or change.
(1) If vehicle is operated u
change engine oil eve
(2) More frequent mainte
(3) Refer to "Recommend
STOP LAMP*
CENTRE HIGH MOUNTED
Notch back
1. Unscrew the two screws from
pedestal.
2. Separate lamp housing from socket.
3. Disconnect wiring harness connector.
4. Insert new bulb.
Hatch back
1. Unscrew the two lens screws.
2. Take off lens.
3. Insert new bulb.
4. Install in reverse order.
Untitled-44 10/31/2006, 12:55 PM24
To Next Page
Loading...
