9ñ4
Prompt washing may not completely
remove all of these deposits. Other
cleaners may be needed. When using
chemical cleaners, be sure they are safe
for use on painted surfaces.
Finish damage
Any stone chips, fractures or deep
scratches in the finish should be repaired
promptly. Bare metal will corrode quickly
and may develop into a major repair
expense. Minor chips and scratches can
be repaired with touch-up materials. Larger
areas of finish damage can be corrected
in your dealerís body and paint shop.
Underbody maintenance
Corrosive materials used for ice and snow
removal and dust control can collect on the
underbody. If these materials are not
removed, accelerated corrosion (rust) can
occur on underbody parts such as fuel
lines, frame, floor pan and the exhaust
system even though they have been
provided with corrosion protection.
At least every spring, flush these materials
from the underbody with plain water. Take
care to clean any areas where mud and
other debris can collect. Sediment packed
in closed areas of the frame should be
loosened before being flushed. If desired,
your Daewoo dealer can do this service
for you.
WARNING
When an engine is washed, fuel, grease
and oil residues are washed off.
Therefore you should use only a filling
station or a Daewoo Dealer who has oil
separator equipment in the car wash
bay.
Used engine oil, brake fluid,
transmission fluid, antifreeze, batteries
and tires should be disposed of by
using the local authorized waste
disposal facilities, or have them
disposed of by the vendor who is under
a statutory obligation to do so when you
replace them.
On no account must any of these items
be placed in the household refuse bins
or the fluids poured down the drains.
Everyone should be concerned about
environmental protection.
Help by doing your share.