2ñ8
Kickdown
When the accelerator pedal i
beyond its resistance point b
speeds, the transmission shif
a lower gear. Full use is made
power for acceleration.
Engine braking
In order to utilize the engine b
when driving downhill, select
"3", "2" or, if necessary, "1" in
The braking action is most effe
range "1". If drive range "1" is
too high a speed, the transmis
in second gear until the shift
gear is reached, e.g. as
deceleration.
d
DRIVING TIPS FOR 4-SPEEDEMERGENCY OPERATION
SWITCH (4-SPEED AUTO T/M)*
POWER/ECONOMY MODES
Power mode:
For powerful acceleration or driving up
long slopes, push the power mode switch
on selector lever.
The "PWR" indicator light will come on. The
transmission shifts into the POWER driving
pattern. The transmission will shift at higher
engine revolution obtaining powerful
acceleration when passing or climbing.
Economy mode:
For normal driving.
This is the most effective and economical
mode for routine, stop-and-go or motorway
driving. The transmission will shift
automatical in this mode.
power mode
switch
If the "POWER" indicator flashes
continuously, a fault has occurred in the
TCM (Transmission Control Module) or
electronic part/sensor.
In this situation automatic shifting can be
cancelled and then gear position will be
automatically landed to 2nd gear in drive
position D, 3 and 2 as follows;
Starting the car
After starting the engine and before
shifting into a drive range, depress the
brake pedal since the vehicle will otherwise
start to "creep". Never use accelerator and
brake pedals simultaneously.
For normal driving conditions the "D"
position should be selected.
If the accelerator pedal is depressed gently
and evenly the transmission will shift into
the fuel-saving higher gears at an early
stage. The drive range needs to be
changed manually only in exceptional
cases. Select "3", "2" and "1" only when
automatic shifting up is to be avoided or if
additional use is to be made of the engine
braking effect.
Return to "D" as soon as conditions permit.
FOR 4-SPEED AUTOMATIC T/M* AUTOMATIC TRANSMISSION
*
PRND3 2 1
Selector lever
position
PRN2221
Gear
position
You must consult a Daewoo Dealer or
Daewoo Authorized Service Operations as
soon as possible when this condition
occurs. The system's integral self-
diagnosis facility allows faults to be quickly
remedied.
Untitled-50 10/31/2006, 12:53 PM8
To Next Page
Loading...
