EasyManua.ls Logo

Daewoo Cielo - SEAT BELT HEIGHT ADJUSTOR*; USING THE BELT

Daewoo Cielo
126 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1ñ13
SEAT BELT HEIGHT ADJUSTOR
*
On seat belts with a height-adjustable upper
anchorage point: pull belt out, depress the
area indicated by an arrow and adjust the
height.
This is particularly important if a smaller
person has previously selected a lower
position.
Too high a position can impair comfort.
USING THE BELT
Pull the belt evenly out of the retractor and
guide it across the body, making certain that
it is not twisted.
Insert the metal latch plate
c
into the
buckle
d
.
To remove the belt, depress the red push-
button on the buckle. The belt will retract
automatically.
If the belt locks when being pulled out,
rewind it completely in the retractor,
then pull it out to the desired length.
NOTE
Both arms should not be under or over
the shoulder belt. Rather, one should
be over and the other under.
Do not wear the shoulder portion of
seat belt under the arm. Make sure
that the shoulder portion of seat belt
is positioned midway over the
shoulderñnever across the neck, and
the lap portion of the belt is fitted
snugly around the hips, not the waist.
WARNING
Always be sure that the belt is
positioned across the shoulder, as
close to your neck as possible and not
on your upper arm or neck. Failure to
do so could reduce the amount of
protection in an accident and increase
the chance of injury.
CAUTION
press
press

Table of Contents

Related product manuals