3ñ11
The seat belt warning light comes
on whenever the ignition switch
is placed in the "II" position unless the
driver's seat belt is securely fastened.
Also, the seat belt warning chime will
sound for about 4 to 8 seconds when the
ignition switch is in the "II" position unless
the driver's seat belt is securely fastened.
SEAT BELT REMINDER LIGHT*HIGH BEAM INDICATOR
This indicator illuminates when
the headlight high beam is
switched on.
This warning light illuminates
when the ignition is switched on
and should go out after the engine has
started.
If the light doesn't come on when the ignition
is switched on, contact your nearest
Daewoo Dealer.
If the light illuminates while driving, stop your
car in a safe place and turn off the engine.
Reset the system by restarting the engine.
If the light comes on again while driving, a
malfunction of ABS system is indicated.
Have the system checked at your nearest
Daewoo Dealer.
Remember that this only means that ABS
is cancelled. Consult your Daewoo Dealer
as soon as possible if this condition
occures ñ your car's brake system will
continue to operate conventionally.
ABS WARNING LIGHT
*
ABS
To Next Page
Loading...
