1ñ9
DRIVER'S SEAT HEIGHT
The desired seat height can be achieved by
turning the crank handle located below the
driver's seat.
ADJUSTMENT
*
To adjust the seat back, lift up the lever (or
rotate the recliner) until the desired angle is
achieved.
ADJUSTMENT
FRONT SEAT RECLINING
The seat backs should always be in a
fairly upright position when driving, or
the effectiveness of the seat belts may
be reduced.
The seat belts are designed to offer
maximum protection when seat backs
are in the fully upright position.
Make sure that the reclining seat backs
are properly adjusted before you start
driving.
WARNING
To avoid excessive seat belt slack,
which reduces the effectiveness of
seat belts, make sure that the seats
are adjusted before the seat belts are
fastened.
WARNING
Do not place articles under the front
seat that may interfere with the seat
lock mechanism. Loose objects might
interfere with seat-slide mechanism.
CAUTION
lift up
turn
To Next Page
Loading...
