Daewoo D45S-2 - Page 43

- 28 -
I
Rocker Arm Shaft
Orderly release rocker arm shaft fixed bolts.(as shown
in figure)
I
Cylinder Head Bolts
Orderly release cylinder head bolts.(as shown in figure)
I
Crankshaft Pulley Nuts
Use 54mm wrench when removing the crank shaft
pulley nut.
I
Taper Bushing
Use the taper bushing remover as shown in figure tool
when removing the crank shaft pulley bushing.
I
Flywheel
Orderly release the fly wheel mounting bolts.(as shown
in figure)
EJM2013S
EJM2014S
EJM2015S
EJM2016I
31
2
56
4
EJM2017S
Front
Crank shaft
pulley
Wrench
Taper
bushing
Crankshaft
Taper bushing remover
pulley