Daewoo DE12T - Page 93

•
Coat the head bolts with engine oil,
then tighten them in proper sequence
to the specified torque.
<Cylinder Head Bolts>
•
Coat the push rod with engine oil and
insert it into the push rod hole.
•
Adjust the valve clearance as follow-
ing guide.
- 89 -
REASSEMBLY
EAMD102I
12
32
14
89
56710
11
13
14
EAMD103I
Type 1 Type 2 Type 3(12.9T) Type 4(12.9T) Type 5(10.9T)
M14x1.5x153 M14x1.5x150 M14x1.5x153 M14x1.5x150 M14x1.5x150
Tighten
1st : 6 kg.m 1st : 6 kg.m 1st : 7 kg.m 1st : 6 kg.m
torque
24.5 kg.m 2nd : 180
˚ 2nd : 90˚ + 90˚ 2nd : 90˚ + 90˚ 2nd : 90˚ + 90˚
Finished : 150˚ Finished : 30˚ Finished : 90˚
TY
12.9T
TY
10.9T
TY
DL08