Local Configurations 112
supports Auto, TCP, UDP, or MULTICAST.
If the remote device is added through other manufacturers, the
system supports TCP and UDP.
If the remote device is added through Onvif protocol, selecting the
Encrypt check box will provide encryption protection to the data being
transmitted.
To use this function, the HTTPS function should be enabled for the
remote IP camera.
Table 5-30
Click Apply to save the settings. Step 3
Only one device can be added manually at one time.
indicates successful connection and indicates connection failed.
5.6.1.4 Modifying or Deleting Remote Devices
You can modify and delete the added devices.
To modify the remote devices, do the following:
Click or double-click a device. Step 1
The Edit interface is displayed. See Figure 5-80.
Figure 5-80
In the Channel list, select the channel that you want to modify settings for. Step 2
Click OK to save the settings. Step 3
To Next Page
Loading...
