Local Configurations 113
Click Copy to copy the user name and password to other channels.
To delete one or more added devices, do the following:
Click to delete one device.
Select the check box of the devices that you want to delete, and then click Delete.
5.6.1.5 Modifying IP Address
You can modify a single IP address or multiple IP addresses of remote devices at one time.
To modify a single IP address, do the following:
In the Searched Device list area, click for the device that you want to modify IP. Step 1
The Modify IP interface is displayed. See Figure 5-81.
Figure 5-81
Configure the settings for IP address, subnet mask, default gateway, user name, and Step 2
password.
Enable the Add function to add the device into the Added Device area. Step 3
Click OK to save the settings. Step 4
To modify IP address in batches, do the following:
In the Searched Device list area, select the devices that you want to modify IP address Step 1
in batches.
Click . Step 2
The Modify IP interface is displayed. See Figure 5-82.
To Next Page
Loading...
