Dahua NVR52-4KS2 SERIES User Manual

Figure 5-5 Edit network adapter
2. Congure parameters.
Table 5-3 Network parameters
Parameter
Description
Network Mode
●
Single NIC: Two network adapters work separately. If one of the
two network adapters is disconnected, the system network status
is regarded as oine.
●
Fault Tolerance: Two network adapters share one IP address.
Normally only one network adapter is working. When this adapter
fails, the other network adapter will start working automatically to
ensure the network connection.
When you test the network status, the network is regarded as
oine only when both network adapters are disconnected.
The two network adapters are used under the same LAN.
●
Load Balance: Two network adapters share one IP address. The
two adapters work at the same time to share the network load
averagely. If one of them fails, the other can continue working
normally.
When testing the network status, the network is regarded as
oine only when both of the two network adapters are
disconnected.
The two network adapters are used under the same LAN.
The Device with single Ethernet port does not support this function.
Default Ethernet Port
IP Version Select IPv4 or IPv6. Both versions are supported for access.
User's Manual
128

Dahua NVR52-4KS2 SERIES Specifications

General

Brand	Dahua
Model	NVR52-4KS2 SERIES
Category	Network Hardware
Language	English