Dahua NVR52-4KS2 SERIES User Manual

Figure 5-48 EPTZ linkage
Table 5-15 Parameters description
Parameter Description
Channel Select the linkage channel.
Display Mode
Select the number of tracked channels. Full screen, 1+1, 1+3 and 1+5
modes are available, and full screen is selected by default.
Linkage Track
After Linkage Track is enabled, intelligent events will be tracked. It is
disabled by default.
Tracking Duration
●
Custom: Select the tracking duration time manually. For example, if
you set from 30 s to 60 s, after tracking object A for 30 s, if object B
appears, the camera will start tracking object B; if no other object
appears in the process of tracking A, the camera will stop tracking
object A after 60 s.
●
Continue till object disappears: The camera will stop tracking when
the detected object disappears in the image.
Step 4 Click Apply.
Related Operations
When an intelligent event is triggered, the live page will display the linkage track eect.
Check the EPTZ linkage in the live page.
Right-click the live page, and then select EPTZ. Enable EPTZ, and then you can view local EPTZ live
videos.
User's Manual
167

Dahua NVR52-4KS2 SERIES Specifications

General

Brand	Dahua
Model	NVR52-4KS2 SERIES
Category	Network Hardware
Language	English