Figure 5-201 Parameters (Registration mode)
Table 5-55 Parameters description
Parameter
Description
Alarm Trigger Condition
Receive an alarm event according to the set rule and display
it on the live page.
●
Match attributes alarm: When the detected workwear
matches the set attributes, an alarm is triggered.
●
Mismatch attributes alarm: When the detected workear
does not match the set attributes, an alarm is triggered.
Min Duration
Set the minimum time for the person wearing the workwear
to appear in the detection area until an alarm is triggered.
Repeat Alarm Time
Set the repeat alarm time.
If the alarm state persists, when reaching the repeat alarm
time, the alarm is triggered again.
User's Manual
324
To Next Page
Loading...
Need help?
General
