Parameter Description
Workwear
Select Detection Mode.
●
Detect by attribute: You need to set the detection range.
●
Registration mode: You need to link the workwear
database that has been set for the front-end camera.
Receive an alarm event based on the linked workwear
database and display it.
1. Click Settings next to Linked Workwear Database.
2. Select workwear database1 , and then click OK.
Hat Select Detect for Attributes , Detection Range, and Color.
Face Mask
Select Detect for Attributes.
Apron
Gloves
Shoe Covers
Boots
Seatbelt
Safety Vest
Step 6 Congure alarm schedule and linkage.
Figure 5-202 Schedule and alarm linkage
1. Click .
2. Click Setting next to Schedule to congure the alarm period.
The system performs linkage actions only for alarms during the arming period.
●
On the time line, drag to set the period.
User's Manual
325
To Next Page
Loading...
Need help?
General
