You can conîš‚gure IP address, subnet mask, default gateway, DHCP server of the Device.
Procedure
Step 1 Select Main Menu > NETWORK > Wi-Fi AP > Advanced.
Figure 5-223 Advanced settings
Step 2 Conîš‚gure parameters.
Table 5-62 Parameters of advanced settings
Parameter
Description
IP Address Set IP address, subnet mask and default gateway for the Wi-Fi of NVR.
IP address and default gateway must be on the same network segment.
Subnet Mask
Default Gateway
Start IP
Set the start IP address and end IP address of the DHCP server.
End IP
Preferred DNS
Set preferred and alternate DNS server address.
Alternate DNS
Step 3 Click Apply.
User's Manual
348
To Next Page
Loading...
Need help?
General
