Please install Ser-U FTP SERVER first. From “start” -> “program” -> Serv-U FTP Server
-> Serv-U Administrator. Now you can set user password and FTP folder. Please note you
need to grant write right to FTP upload user. See Figure 3-98.
Figure 3-98
You can use a PC or FTP login tool to test setup is right or not.
For example, you can login user ZHY to H1 40H140H140HTUFTP://10.10.7.7UTH and then test it can modify
or delete folder or not. See Figure 3-99.
Figure 3-99
System also supports upload multiple DVRs to one FTP server. You can create multiple
folders under this FTP.
FTP interface is shown as in Figure 3-100.
Please highlight the icon in front of Enable to activate FTP function.
Here you can input FTP server address, port and remote directory. When remote directory
is null, system automatically create folders according to the IP, time and channel.
User name and password is the account information for you to login the FTP.
File length is upload file length. When setup is larger than the actual file length, system will
upload the whole file. When setup here is smaller than the actual file length, system only
uploads the set length and auto ignore the left section. When interval value is 0, system
To Next Page
Loading...
Need help?
General
