Dahua XVR User Manual

19
3.2.1 Set Password
For your own safety, please set your administrator default password after you first
boot up the device.
After system booted up, you can see the following interface if it is your first time to use or
you have restored default setup. See Figure 3-1. Please input a password and then input
again to set a password.
 You can set security questions here to reset the password in case you forgot. System
supports customized setup. Please note you need to set two security questions at the
same time. When you reset the password, you need to answer these two security
questions too.
 For reset information, please refer to chapter 3.2.2.
Figure 3-1
After you complete the setup, click OK button, system pops up the following interface for
you to confirm. Click OK button to exit. See Figure 3-2.
Figure 3-2

Dahua XVR Specifications

General

Channels	4/8/16
Video Compression	H.265/H.264
Audio Input	Yes
Audio Output	1 channel RCA
Video Output	HDMI/VGA
Recording Resolution	720P
HDD	1 SATA
Network Interface	RJ45
USB Interface	2 USB 2.0
Power Supply	12V DC
Operating Temperature	-10 °C to +55 °C