3.11.5.9 Auto Maintain
Here you can set auto-reboot time and auto-delete old files setup. You can set to delete
the files for the specified days. See Figure 3-195.
You can select proper setup from dropdown list.
After all the setups please click save button, system goes back to the previous menu.
Figure 3-195
3.11.5.10 Config Backup
The configuration file backup interface is shown as below. See Figure 3-196.
This function allows you to import/export system configuration. You can use this function
when there are several devices need the same setup.
Export: Please connect the peripheral device first and then go to the following
interface. Click Export button, you can see there is a corresponding “Config_Time”
folder. Double click the folder, you can view some backup files.
Import: Here you can import the configuration files from the peripheral device to
current device. You need to select a folder first. You can see a dialogue box asking
you to select a folder if you are selecting a file. System pops up a dialogue box if
there is no configuration file under current folder. After successfully import, system
needs to reboot to activate new setup.
Format: Click Format button, system pops up a dialogue box for you to confirm
current operation. System begins format process after you click the OK button.
Note:
To Next Page
Loading...
Need help?
General
