Figure 3-117
Note
Video analysis alarm can trigger PTZ preset, tour, and pattern.
Please refer to chapter 3.11.3.1.1 motion detection for detailed information.
3.11.3.2 Intelligence (Optional)
Important
The intelligence function is optional.
The different series products support different IVS functions. Please refer to
your purchased product actual interface for detailed information.
The IVS function supports 1 analog channel only. Right now some series
products support IP channel.
Once any object violate the rule, the DVR can trigger an alarm and alert you as the
specified alarm mode.
From main menu->Setting->Event->Intelligence, you can go to the following interface.
Here you can set IVS rule. System can generate an alarm as the mode you
previously set once there is any object violates the rule. See Figure 3-118.
To Next Page
Loading...
Need help?
General
