Dahua XVR - Wifi

89
Figure 3-90
3.11.2.3 WIFI
The WIFI interface is shown as below. See Figure 3-91.
 Auto connect WIFI: Check the box here, system automatically connects to the
previous WIFI hotspot.
 Refresh: You can click it to search the hotspot list again. It can automatically add the
information such as the password if you have set it before.
 Disconnect: Here you can click it to turn off the connection.
 Connect: Here you can click it to connect to the hotspot. System needs to turn off
current connection and then connect to a new hotspot if there is connection of you
selected one.