Dahua XVR User Manual

188
Figure 4-21
The digital channel is shown as in Figure 4-22.
Figure 4-22
Please refer to the following sheet for detailed information.
Parameter Function
Channel Please select a channel from the dropdown list.
Cable type
It is to set the cable type of the corresponding analog channel.
When the setup here matches the actual cable you are using,
you can get the best image effect. The default setup is
COAXIAL. Please note this function is for some series product
only.
 COAXIAL: When the corresponding channel is using
coaxial cable, please select COAXIAL.
 UTP: When the corresponding channel is using UTP cable,
please select UTP. Usually we recommend 10Ohm UTP
cable.

Dahua XVR Specifications

General

Channels	4/8/16
Video Compression	H.265/H.264
Audio Input	Yes
Audio Output	1 channel RCA
Video Output	HDMI/VGA
Recording Resolution	720P
HDD	1 SATA
Network Interface	RJ45
USB Interface	2 USB 2.0
Power Supply	12V DC
Operating Temperature	-10 °C to +55 °C