More details
Text reuse
All text entered is recorded in a database.
When setting up new templates, you can retrieve and reuse this
text.
Place the cursor in the field where you want to use the name. Then
select the text that you want to copy to the field.
(The text will only appear in the database once the template has
been saved).
Multiple views?
If you want to have multiple views available in the current tem-
plate, repeat the settings process for View 2, etc.
There is a function in the display that provides access to “More
details”
You can specify what is shown here in the “Setting parameters”
field.
1. Click on the “Add setting parameter” button
2. Select a parameter
3. Give it a name
4. Select a display type
5. Define the level of access rights to the parameter. There are 4
levels to choose from:
“Read only” means that the parameter cannot be edited.
“Config lock” means that the user must be logged in using the
password for configuration and the configuration must be
locked before the parameter can be edited.
“Service pw” means that the parameter can be edited if the user
is logged in with the password for service.
“User pw” means that the parameter can be edited if the user is
logged in for user operation.
You can select up to 20 parameters in this display.
Further right: More details
To Next Page
Loading...
Need help?
General
