Danfoss FC 300

3-52 Ramp 2 ramp
down time
3-80 Jog ramp time
3-81 Quick stop ramp
time
4-11 Motor speed low
limit (RPM)
4-13 Motor speed
high limit (RPM)
4-16 Torque limit mo-
tor mode
4-17 Torque limit
generator mode
7-28 Minimum Feed-
back
7-29 Maximum Feed-
back
8-90 Bus Jog 1 Speed
8-91 Bus Jog 2 Speed
16-80 Fieldbus CTW 1
(Fixed)
16-82 Fieldbus REF 1
(Fixed)
34-01 PCD 1 Write to
MCO
34-02 PCD 2 Write to
MCO
34-03 PCD 3 Write to
MCO
34-04 PCD 4 Write to
MCO
34-05 PCD 5 Write to
MCO
34-06 PCD 6 Write to
MCO
34-07 PCD 7 Write to
MCO
34-08 PCD 8 Write to
MCO
34-09 PCD 9 Write to
MCO
34-10 PCD 10 Write to
MCO
Select the process write data for I/O Assembly Instances
101/151. Elements [2] and [3] of this array can be selected.
Elements [0] and [1] of the array are fixed.
10-12 Process Data Config Read
Option: Function:
None
16-00 Control Word
FC 300 Programming Guide 2. How to Programme
MG.33.M2.02 - VLT
®
is a registered Danfoss trademark 147
2