Danfoss FC 300

15-45 Actual Typecode String
Option: Function:
View the actual type code string.
15-46 Frequency Converter Ordering No
Option: Function:
View the 8-digit ordering number used for re-ordering the fre-
quency converter in its original configuration.
15-47 Power Card Ordering No
Option: Function:
View the power card ordering number.
15-48 LCP Id No
Option: Function:
View the LCP ID number.
15-49 SW ID Control Card
Option: Function:
View the control card software version number.
15-50 SW ID Power Card
Option: Function:
View the power card software version number.
15-51 Frequency Converter Serial Number
Option: Function:
View the frequency converter serial number.
15-53 Power Card Serial Number
Option: Function:
View the power card serial number.
2.16.7. Option Ident. 15-6*
This read-only parameter group contains information about the hardware and software configu-
ration of the options installed in slots A, B C0 and C1.
2. How to Programme FC 300 Programming Guide
188 MG.33.M2.02 - VLT
®
is a registered Danfoss trademark
2