Danfoss FC 300

15-60 Option Mounted
Option: Function:
View the installed option type.
15-61 Option SW Version
Option: Function:
View the installed option software version.
15-62 Option Ordering No
Option: Function:
Shows the ordering number for the installed options.
15-63 Option Serial No
Option: Function:
View the installed option serial number.
2.16.8. Parameter Info, 15-9*
Parameter lists
15-92 Defined Parameters
Array [1000]
0 *
[0 - 9999] View a list of all defined parameters in the frequency converter.
The list ends with 0.
15-93 Modified Parameters
Array [1000]
0 *
[0 - 9999] View a list of the parameters that have been changed from their
default setting. The list ends with 0. Changes may not be visible
until up to 30 seconds after implementation.
15-99 Parameter Metadata
Array [30]
0 *
[0 - 9999] This parameter contains data used by the MCT10 software tool.
FC 300 Programming Guide 2. How to Programme
MG.33.M2.02 - VLT
®
is a registered Danfoss trademark 189
2