Danfoss FC 300

16-68 Freq. Input #33 [Hz]
Range: Function:
0
*
[0 - 130000] View the actual value of the frequency applied at terminal 33 as
an impulse input.
16-69 Pulse Output #27 [Hz]
Range: Function:
0
*
[0 - 40000] View the actual value of pulses applied to terminal 27 in digital
output mode.
16-70 Pulse Output #29 [Hz]
Range: Function:
0
*
[0 - 40000] View the actual value of pulses at terminal 29 in digital output
mode.
This parameter is available for FC 302 only.
16-71 Relay Output [bin]
Range: Function:
0
*
[0 - 31] View the settings of all relays.
16-72 Counter A
Range: Function:
0
*
[-2147483648
-2147483647]
View the present value of Counter A. Counters are useful as
comparator operands, see par. 13-10.
The value can be reset or changed either via digital inputs (pa-
rameter group 5-1*) or by using an SLC action (par. 13-52).
16-73 Counter B
Range: Function:
0
*
[-2147483648
-2147483647]
View the present value of Counter B. Counters are useful as
comparator operands (par. 13-10).
The value can be reset or changed either via digital inputs (pa-
rameter group 5-1*) or by using an SLC action (par. 13-52).
16-74 Precise Stop Counter
Range: Function:
0
*
[0 - 2147483647] Returns the actual counter value of precise counter (par. 1-84).
2. How to Programme FC 300 Programming Guide
196 MG.33.M2.02 - VLT
®
is a registered Danfoss trademark
2