Danfoss VLT 6000 HVAC Series

terminal 16 or 17 to activate the Fire Mode. The fre-
quency converter will run at the in parameter 431
selected speed.
Only by setting input 16 or 17 high or opening terminal
27 deactivates fire mode again.
Enable RTC is used to start the real time clock func-
tion. When enabled the real time clock functions will
be executed based on time. See description of RTC
for further information.
VLT
®
6000 HVAC Series
= factory setting, () = display text, [] = value for use in communication via serial communication port
MG.61.B5.02 - VLT
®
is a registered Danfoss trademark 127
Programming