Danfoss VLT 6000 HVAC Series User Manual

Introduction to the Design Guide
This Design Guide is a tool intended to facilitate the sizing of systems in which VLT 6000 HVAC frequency
converters are used.
HVAC stands for Heating Ventilation Air-Conditioning.
This Design Guide progresses step-by-step through the different procedures required for selecting, installing and
programming a VLT 6000 HVAC.
The Design Guide forms part of the literature concept supplied with VLT 6000 HVAC. However, the Design Guide
is the most comprehensive document available.
When a VLT 6000 HVAC is supplied, it is accompanied by Operating Instructions and a Quick Setup Guide. See
the section Other Literature.
Operating Instructions:
Describe how to ensure optimum mechanical and electrical installation, and also
deal with commissioning and service. The Operating Instructions furthermore pro-
vide a description of the software parameters, thereby ensuring that you can easily
fit the VLT 6000 HVAC into your application.
Quick Setup Guide:
Helps you get your VLT 6000 HVAC installed and commissioned quickly.
Design Guide:
Used when designing systems with VLT 6000 HVAC. The Design Guide gives all
useful information about the VLT 6000 HVAC and HVAC systems. There is a se-
lection tool for you to choose the right VLT 6000 HVAC with the relevant options
and modules. The Design Guide has examples of the most common types of HVAC
applications. In addition, the Design Guide has all information relating to Serial
Communication.
This Design Guide is split in four sections that have information about VLT 6000 HVAC.
Introduction to HVAC:
This section tells you the advantages that can be obtained by using frequency
converters in HVAC systems. Furthermore, you can read about the way a fre-
quency converter operates and about the advantages of the VLT 6000 HVAC, such
as AEO - Automatic Energy Optimisation, RFI filter and other HVAC-relevant func-
tions.
There are also examples of applications and information is given about Danfoss
and CE-labelling.
The specification section deals with the requirements relating to being allowed to
supply and install frequency converters. This section can be used in contract
documents, whereby the total list of requirements relating to frequency converters
is determined.
The section ends with an Ordering Guide that makes it easier for you to specify
and order a VLT 6000 HVAC.
VLT
®
6000 HVAC Series
MG.61.B5.02 - VLT
®
is a registered Danfoss trademark 7
Introduction to HVAC

Danfoss VLT 6000 HVAC Series Specifications

General

Brand	Danfoss
Model	VLT 6000 HVAC Series
Category	DC Drives
Language	English