Danfoss VLT 6000 HVAC Series

Introduction to the Design Guide
Installation:
This section shows you how to carry out correct mechanical installation of a VLT
6000 HVAC.
In addition, the section has a description of how you ensure that the installation
of the VLT 6000 HVAC is EMC-correct. Furthermore, the section includes a list
of mains and motor connections, as well as a description of control card termi-
nals.
Programming:
This section describes the control unit and the software parameters for the VLT
6000 HVAC. There is also a guide to the Quick Setup menu, which means that
you will be able to start using your application very quickly.
All about VLT 6000:
This section has information about status, warning and fault indications from
the VLT 6000 HVAC. In addition, the section has technical data, service infor-
mation, factory settings and information on special conditions.
NB!
This symbol indicates something to be no-
ted by the reader.
This symbol indicates a general warning.
This symbol indicates a high-voltage
warning.
VLT
®
6000 HVAC Series
8 MG.61.B5.02 - VLT
®
is a registered Danfoss trademark