Danfoss VLT 6000 HVAC Series User Manual

kg/min [9]
kg/h [10]
m
3
/s [11]
m
3
/min [12]
m
3
/h [13]
m/s [14]
mbar [15]
bar [16]
Pa [17]
kPa [18]
mVS [19]
kW [20]
°C [21]
GPM [22]
gal/s [23]
gal/min [24]
gal/h [25]
Ib/s [26]
lb/min [27]
lb/h [28]
CFM [29]
ft
3
/s [30]
ft
3
/min [31]
ft
3
/h [32]
ft/s [33]
in wg [34]
ft wg [35]
PSI [36]
lb/in
2
[37]
HP [38]
°F [39]
Function:
Selection of unit to be shown on the display.
This unit will be used if Reference [unit] [2] or Feedback
[unit] [3] has been selected in one of the parameters
007-010, as well as in the Display mode.
In Closed loop, the unit is also used as a unit for Mini-
mum/ Maximum reference and Minimum/Maximum
feedback, as well as Setpoint 1 and Setpoint 2.
Description of choice:
Select the required unit for the reference/feedback sig-
nal.
VLT
®
6000 HVAC Series
= factory setting, () = display text, [] = value for use in communication via serial communication port
MG.61.B5.02 - VLT
®
is a registered Danfoss trademark 145
Programming

Danfoss VLT 6000 HVAC Series Specifications

General

Brand	Danfoss
Model	VLT 6000 HVAC Series
Category	DC Drives
Language	English