Danfoss VLT AutomationDrive User Manual

8.4.1 Fault Messages 52
9 Basic Troubleshooting
60
9.1 Start Up and Operation
60
10 Specifications
62
10.1 Power-dependent Specifications
62
10.2 General Technical Data
71
10.3 Fuse Tables
76
10.3.2 CE Compliance 77
10.4 Connection Tightening Torques
84
Index
85
Contents
VLT
®
AutomationDrive Operating
Instructions
MG.33.AJ.02 - VLT
®
is a registered Danfoss trademark 3

Danfoss VLT AutomationDrive Specifications

General

Supply Voltage	3 x 200-240 V ±10% 3 x 380-500 V ±10% 3 x 525-600 V ±10%
Enclosure	IP20
Output Power Range	0.25 kW - 1.5 MW
Communication Protocols	Modbus RTU
Protection Features	Overcurrent, Overvoltage, Undervoltage, Short circuit, Ground fault, Motor overload
Ambient Temperature Range	-10°C to +50°C (14°F to 122°F)