Danfoss vlt FC 102 Programming Guide

40-42 Alarm Log: Current
Range: Function:
0 A* [0 - 10000 A]
40-43 Alarm Log: Voltage
Range: Function:
0 V* [0 - 6000 V]
40-44 Alarm Log: DC Link Voltage
Range: Function:
0 V* [0 - 10000 V]
40-45 Alarm Log: Control Word
Range: Function:
0* [0 - 65535 ]
40-46 Alarm Log: Status Word
Range: Function:
0* [0 - 65535 ]
3.31 Parameters: 43-** Unit Readouts
43-00 Component Temp.
Range: Function:
0 °C* [-128 -
127 °C]
43-01 Auxiliary Temp.
Range: Function:
0 °C* [-128 -
127 °C]
43-02 Component SW ID
Range: Function:
0* [0 - 20 ]
43-10 HS Temp. ph.U
Range: Function:
0 °C* [-128 -
127 °C]
43-11 HS Temp. ph.V
Range: Function:
0 °C* [-128 -
127 °C]
43-12 HS Temp. ph.W
Range: Function:
0 °C* [-128 -
127 °C]
43-13 PC Fan A Speed
Range: Function:
0 RPM* [0 - 65535
RPM]
43-14 PC Fan B Speed
Range: Function:
0 RPM* [0 - 65535
RPM]
43-15 PC Fan C Speed
Range: Function:
0 RPM* [0 - 65535
RPM]
43-20 FPC Fan A Speed
Range: Function:
0 RPM* [0 - 65535
RPM]
43-21 FPC Fan B Speed
Range: Function:
0 RPM* [0 - 65535
RPM]
43-22 FPC Fan C Speed
Range: Function:
0 RPM* [0 - 65535
RPM]
43-23 FPC Fan D Speed
Range: Function:
0 RPM* [0 - 65535
RPM]
43-24 FPC Fan E Speed
Range: Function:
0 RPM* [0 - 65535
RPM]
43-25 FPC Fan F Speed
Range: Function:
0 RPM* [0 - 65535
RPM]
Parameter Descriptions
VLT
®
HVAC Drive FC 102
272 Danfoss A/S © 10/2019 All rights reserved. M0010001
33

Danfoss vlt FC 102 Specifications

General

Category	DC Drives
Model	Danfoss VLT FC 102
Output voltage range	0 to rated motor voltage
Power range	0.37 kW to 200 kW
Communication interfaces	RS-485
Protection features	Overvoltage, undervoltage, overcurrent, short circuit, earth fault, overtemperature, motor thermal protection
Cooling method	Air-cooled
Enclosure rating	IP20, IP21, IP55 (depending on model)
Approvals	CE, UL, cUL